100% very strong glue for general renovations, stays fresh for a long time
For any surface and for any purpose
For installations, fixings, filling gaps, painted and wet surfaces and more
100% waterproof
Quick grip in 30 seconds MS POLYMER technology
Exposure temperature after drying: 40 degrees to 93 degrees
Sticky: Tiles, Mirrors, Trim, Drywalls, Landscaping, Bath, Foamboard, Marble and more!
Product features:
Hard, multi-purpose adhesive, for all weathers. Has a formula of 100% glue that provides a strong bond over time. Glue to any surface, for any purpose.
The adhesive formula is durable, fills the gaps, is 100% waterproof and perfect for indoor and outdoor projects,
Holds within 30 seconds, and traps almost everything including floors, mirrors, decoration, drywall, landscaping, bathtub, foam board, marble and more!
glues:
Cornices, hard and soft wood, tiles, marble, granite, thin, gypsum boards, cement boards, baths, planters, metals, mirrors, windows, panels, foam boards, hard and soft stone, laminates, porcelain granite ceramics, bricks, blocks, aluminum , Brass, fiberglass, plastic *, sponge, styrofoam, leather, concrete, glass and more! **
* Not recommended for use on polyethylene and polypropylene, Teflon and bituminous
technical information:
Full drying time: 24 hours. The incubation time will lengthen as the temperature is lower, humidity is high and surfaces are not hollow.
Application temperature: 4 degrees to 38 degrees. Better above 10 degrees
Exposure temperature after drying: 40 degrees to 93 degrees
Painting after drying: with latex paint after an hour, recommended within two days
Staining and polishing after drying: V
Coverage: 13 m running 4.5 mm in diameter
MSDS
The full warning and storage instructions on the product label should be read carefully before use
User manual:
Preparation: Clean and dry adhesive surfaces. Apply in a ventilated place and do not mix with other materials, wear goggles and gloves.
Remove the cap, screw in the nozzle and cut the tip to the desired diameter and insert into the gun (for size 266 ml)
Apply in a zigzag shape on one of the surfaces and / or into the perimeter of the object
Linkage time: 20-60 seconds
Working time: application and linkage up to 10 minutes
Cleaning: Immediately wipe off the remnants of wet glue from the surface with a dry cloth.
Storage: Store in a cool, dry place with the nozzle tightly closed with the tip covered. For reuse, the spout should be removed and glue residue cleaned from the edge. Isopropyl alcohol can be used according to the manufacturer's instructions.
Wipe the nozzle after use, lightly press the bottle to expel air and store in a cool, dry place. Do not heat or leave in a hot vehicle.
Please note: the connection is permanent and therefore may damage the surface if removed.
The full warning and storage instructions on the product label should be read carefully before use
מידע נוסף
Images are for illustration purposes only
