Gorilla Dries Clear Wood Glue
118 ml

Gorilla Dries Clear Wood Glue is an adhesive trusted by woodworkers, carpenters, and hobbyists for woodworking projects. This PVA glue offers the benefits of an easy-to-use, water-based adhesive with Gorilla strength. It is incredibly water resistant and dries clear to create an invisible bond line for your projects.

Bonds:
Wood, hardwoods, and natural wood composites.

Product Features

Dries crystal clear on wood surfaces*
Incredibly strong for wood projects
Type II for indoor/outdoor use
Versatile: ideal for use on hardwoods, softwoods, and natural wood composites.

*Glue will dry crystal clear on wood surfaces only.

Technical Specifications

Application Temperature: 13°C–24°C, best at room temperature
Service Temperature: -18°C to 66°C
Indoor/Outdoor: Yes
Moisture Resistant: Water resistant – not recommended for continual water exposure
Paintable: Yes
Sandable: Yes
Stainable: No
Expands When Cured: No
Cured Color: Clear on wood surfaces
Technical Standards: ANSI/HPVA Type II
Storage Tips: Store at room temperature. Wipe excess glue from spout and keep sealed.
Gap Filling: No

Directions

1. Clean and dry surfaces to be bonded.
2. Shake well before use.
3. Apply glue generously to the surface.
4. Join and clamp for 20–30 minutes. Parts should fit tightly.
5. Excess glue can be removed with a clean, wet cloth or scraped off after glue dries.
6. Allow bond to dry for 24 hours.
7. Remove applicator tip to clean out glue build up.

*For ideal product performance, apply glue on wood-to-wood substrates.

Note: Application temperature should be at or above 13°C. Before finishing, sand surfaces to minimize glue exposure.

Read the full warning and storage instructions on the product label carefully before use.